Wyatt 3D Printer Specifications
|Print Technology||Fused Filament Fabrication (Thermopalstic Extrusion)|
|Print Speed||30 – 250mm/s|
|Travel Speed||1 – 350mm/s|
|Build Area (W x L x H)||23 x 23 x 20|
|Layer resolution||4mm Nozzle = 0.02 – 0.30mm|
|Positioning precision (X x Y x Z)||0.025 × 0.012.5 × 0.005mm|
|Nozzle diameter||Supplied with 0.25mm, 0.4mm and 0.6mm comes fitted with 0.4mm (considered optimal)|
|Standalone Printing||Via LCD Controll screen, SD Card and Web|
|Nozzle Temp||180 – 300|
|Bed Temp||50 – 130|
|Operating Temp||15 – 32|
|Storage Temp||0 – 35|
|AC Volts||100 – 240 Volts, 50 – 60 Hz|
|Power Consumption||< 150 watts|
|Mechanical||Linear bearings on all axis|
|Connectivity||Wifi, USB, SD standalone|
Appaloza HTML5 web enabled application includes placement, slicing and printing functionality. The software can be operated from the printers touchscreen LCD screen or from the websitewww.apaloza.com
As well as Appaloza, the Wyatt is compatible with all open source print software including: Reptier Host, Cura, Printerface, and Slicing programs such as Slic3r, Skienforge et al.
Any operating system with a browser capable of supporting HTML5, including but not limited to Windows, Mac OSX, Linux, iOS, Android.
Heated glass bed plate held in place with Neodymium magnets for easy removal.
CARBON AIR FILTER
Filter engaged when printing ABS material.
Sensor for detecting when filament has ran out or stopped feeding which immediately pauses print job and homes the print head.
It is the Internet age, and we strongly believe that 3D printers should be web enabled and as easy to access as a web page. With Appaloza, you will no longer need to write files to SD cards and walk them to your printer, or leave your laptop tied to your printer until your print is complete. Never again will you need to reboot your computers into obscure maintenance modes to install unsigned drivers.
Learn More About Appaloza