Kobra X Stampante 3D
Updated 6 September 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.it - €339.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
Head-to-head spec + price table against the Anycubic Kobra X Stampante 3D. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (€340). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇮🇹 Anycubic Kobra X Stampante 3D, Dimensioni di Stampa 260 x 260 x 260 mmAmazon.it · New€339.99View
- 🇮🇹 Anycubic Kobra X Stampante 3D con Tecnologia ACE GEN 2, 260x260x260mmAmazon.it · New€339.99View
- 🇮🇹 Anycubic Kobra X Combo Stampante 3D per Principianti, 260 x 260 x 260 mmAmazon.it · New€519.99View
Close alternatives - what €340 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 17.6 L vs 11.6 L build volume.
Get: 370°C hot end (was 300°C) · CoreXY motion - faster, more rigid.
Get: 24.8 L more build volume (42.4 L) · CoreXY motion - faster, more rigid.
Frequently asked
What materials can the Anycubic Kobra X Stampante 3D print? +
At €340 the Anycubic Kobra X Stampante 3D has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Anycubic Kobra X Stampante 3D? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Anycubic Kobra X Stampante 3D? +
260×260×260 mm (17.6 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Is the Anycubic Kobra X Stampante 3D worth €340? +
€340 is the sweet spot tier. The Anycubic Kobra X Stampante 3D competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
