TINA2 Plus
Updated 22 October 2026 · Live prices updated daily
Buy on Amazon.com - $195.49 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Max hot-end temp only 245°C - PLA-dominant territory, no PETG with any safety margin.
Head-to-head spec + price table against the HEPHI3D TINA2 Plus. Verified printers on this marketplace only.
Cheap enough to be a genuine learning purchase, but expect the quirks - stock PTFE tubes, flimsy Bowden setups, firmware that needs flashing. You'll learn a lot fixing it.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($195). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Hephi3d TINA2 Plus 3D Printer for Beginners, Fully Assembled Ready to PrintAmazon.com · New$195.49View
- 🇺🇸 Hephi3d TINA2 Plus Beginner 3D Printer Friendly for Kids, Fully Assembled | Ready to Use, Auto Leveling Mini 3D Printer 250mm/s High Speed, WiFi-APP Control, 3000+ Model Library for Home, STEM, SchoolAmazon.com · New$199.99View
Close alternatives - what $195 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 36.0 L. You'd give up: 245°C hot end vs undefined°C.
Get: 4.8 L more build volume (17.6 L) · 300°C hot end (was 245°C).
Get: 300°C hot end (was 245°C).
Frequently asked
What materials can the HEPHI3D TINA2 Plus print? +
At $195 the HEPHI3D TINA2 Plus realistically prints PLA and TPU. The 245°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the HEPHI3D TINA2 Plus? +
Advertised at 150 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the HEPHI3D TINA2 Plus? +
210×210×290 mm (12.8 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the HEPHI3D TINA2 Plus have auto-levelling? +
Yes - Auto bed leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the HEPHI3D TINA2 Plus worth $195? +
At $195 the HEPHI3D TINA2 Plus is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
