Plus5 Multi-Color
Updated 7 September 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $899.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ CoreXY motion system - faster and more rigid than a bedslinger, especially on tall prints.
- ✓ Active heated chamber - ABS, ASA, nylon and PC become realistic, not just wishful thinking.
- ✓ 370°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ✓ 30.7 L build volume - room for helmets, large functional parts, bulk runs.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the QIDI Plus5 Multi-Color. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
This is the kind of move that makes you wonder why you put up with your old machine for so long. Faster, more rigid, and the first layer stops being a gamble.
Heated chamber, the temps to handle engineering materials, and enough build volume for real parts. This is workshop territory.
Verdicts are rule-driven from the spec sheet and current price ($899). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 QIDI Plus5 Combo Multi-Color 3D Printer, 320×320×300mm Large Build VolumeAmazon.com · New$899.00View
Close alternatives - what $899 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 270.0 L. You'd give up: 370°C hot end vs 300°C, the active heated chamber.
Get: 12.2 L more build volume (42.9 L).
Get: 12.2 L more build volume (42.9 L).
Frequently asked
What materials can the QIDI Plus5 Multi-Color print? +
At $899 the QIDI Plus5 Multi-Color handles serious engineering materials: ABS, ASA, PETG, nylon and PA-CF all within spec. The 370°C hot end and active heated chamber are the two pieces most printers at this price skip. Polycarbonate depends on the rated chamber temperature, so check that before committing.
How fast is the QIDI Plus5 Multi-Color? +
Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the QIDI Plus5 Multi-Color? +
320×320×300 mm (30.7 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.
Does the QIDI Plus5 Multi-Color have auto-levelling? +
Yes - Loadcell auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the QIDI Plus5 Multi-Color worth $899? +
$899 is serious hobbyist territory. For the QIDI Plus5 Multi-Color to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.
