TINA2S
Updated 22 October 2026 · Live prices updated daily
Buy on Amazon.co.uk - £217.79 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under £300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! 1.1 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the WEEFUN TINA2S. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price (£218). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇬🇧 WEEFUN TINA2S 3D Printer Kit and PLA Filament Kit Bundle for Beginners and Kids, WiFi Cloud Printing 3D Printer Fully Assembled, Auto Leveling DIY 3D Printers for BeginnersAmazon.co.uk · New£217.79View
- 🇬🇧 WEEFUN TINA2S 3D Printer Kit with 4 Color Silk PLA Filament Set Bundle for Beginners and Kids, Fully Assembled Auto Leveling Mini 3D Printer WiFi Cloud PrintingAmazon.co.uk · New£219.59View
Close alternatives - what $218 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 1.7 L. You'd give up: nothing obvious on the spec sheet.
Get: 9.6 L more build volume (10.6 L) · 280°C hot end (was —°C).
Get: 15.7 L more build volume (16.8 L) · 320°C hot end (was —°C).
Frequently asked
What materials can the WEEFUN TINA2S print? +
At £218 the WEEFUN TINA2S realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the WEEFUN TINA2S? +
Advertised at 200 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the WEEFUN TINA2S? +
100×105×100 mm (1.1 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Is the WEEFUN TINA2S worth £218? +
£218 is the sweet spot tier. The WEEFUN TINA2S competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
